USER MANUAL | KLANG:fabrik & KLANG:vier
9
© KLANG:technologies GmbH, Aachen, Germany, 2014 | All rights reserved | V0.1.6– 6-Oct-15
DANTE CONTROLLER AND ROUTING
•
Available under:
https://www.audinate.com/products/software/dante-controller
•
Start the
Dante Controller
on your compatible operating system and proceed with the following settings.
•
Connect the audio output of your computer’s
Dante Virtual Soundcard (DVS)
to KLANG:fabrik / KLANG:vier.
•
Please note: The Dante module starts with the same serial number (
KF…/K4…
) as KLANG:fabrik / KLANG:vier.
!
PLEASE NOTE: HIGHLIGHTED DEVICE NAMES IN
RED
INDICATE PROBLEMS WITH THE DANTE SETTINGS.
•
Please disable distracting multiple connections to the same network, e.g. by
disabling WiFi
on your Mac or PC
while using a network cable for Dante streaming.
DANTE LATENCY AND SETTINGS
•
Although Dante is built for low latency, it is important to monitor the settings and the behavior after setup.
In case the
Dante latency exceeds
the specified latency (e.g. of the DVS for streaming playback data
from e.g. Logic, Reaper or ProTools to KLANG:fabrik / KLANG:vier) audible drop outs are likely to appear.
