USER MANUAL | KLANG:fabrik & KLANG:vier
13
© KLANG:technologies GmbH, Aachen, Germany, 2014 | All rights reserved | V0.1.6– 6-Oct-15
CONFIG | SWITCH USER MODES
•
KLANG:app supports
3 modes
that distinguish musicians, technicians and administrators. These modes can be switched
by holding down the
CONFIG button
for more than
5 seconds
.
•
Technician mode
allows to log into an arbitrary user of KLANG:fabrik / KLANG:vier, change channel names, colors, icons,
order, link, etc. In this mode settings can also be stored and recalled. Additionally it allows for fast user switching as well a
“listen to” feature. This feature allows to copy (clone) the sound output of a particular user to another user, e.g. for pre-lis-
tening and mixing for monitor engineers.
•
Administrator mode
enables all features of the previous modes and allows to assign motion trackers and rename the users.
•
Musicians mode
lets the user concentrate on playing his instrument and disables distracting features that are used to
configure KLANG:fabrik / KLANG:vier. This mode mainly allows to mix and position the pre-defined inputs for one chosen
user of KLANG:fabrik / KLANG:vier. In musicians mode, the
CONFIG
button is
not shown
, but it is invisible on the same
position as in administrator or technician mode.
CONFIG | CUE MODE
•
In technician or administrator mode, there is a line for
fast user switching
in the top of the KLANG:app 2. This allows you
to immediately log into another user and adjust its settings. In order to “listen to…” the sound the musician for whom you
are mixing hears, just connect yourself to a free user output of the KLANG:fabrik / KLANG:vier. To
enter the CUE mode
,
click onto your user ID on the top bar and hold this button down for
3 seconds
. You will notice a
purple frame
around this
button.
•
Now click on
another user
. The monitoring mix is mirrored to your output and you are instantaneously logged into that
particular user. Just adjust the mix and proceed to the next musician.
•
To
quit the CUE mode
, hold down your user ID button for
3 seconds
again. The purple frame will disappear.