25
Maintenance and cleaning
The spray arms should be cleaned regularly to avoid clogging
of the nozzles in the spray arms and the bearing with hard
water deposits.
• To remove the spray arm, first unscrew the nut and remove
the washer, which is placed on the upper part of the spray
arm.
To achieve the highest efficiency and best results, the enti-
re filter unit is always thoroughly and regularly (ideally after
each wash cycle) to clean.
1. Turn the coarse filter counterclockwise and pull it in the
direction upwards. Rinse this part under running water
and remove all food residues that have attached themsel-
ves to the filter.
2. Pull the main filter out and rinse it off under running wa-
ter to remove all food residues that have been attached
to the filter.
3. Pull out the fine filter and rinse it off under running wa-
ter to remove all food residues that have been attached
to the filter.
4. Remove the fine filter back in.
5. Remove the main and coarse filter back into the space
provided in the base of the dishwasher one. The coarse fil-
ter must be turned in a clockwise direction, so that it locks
in the correct position.
6.1 Filter cleaning
6.2 Cleaning the spray arms
!
If dish breaks in the device, make sure that all fragments
were removed before the machine is started again, so as
not to damage the unit.
Never turn on the wash cycle when the filters are
not installed!
EN
Open
Open
