12
Using the dishwasher
If there is no rinse-aid warning light on the control panel, you can
judge the amount of rinse-aid by the color of the optical level indi-
cator „D“ located next to the cap. When the rinse-aid container is
full, the whole indicator will be dark. As the rinse aid diminishes,
the size of the dark dot decreases.
Full
3/4 full
1/2 full
1/4 full - Should refill to
eliminate spotting
Empty
rinse aid
indicator
2
1
3.4 Fill the rinse aid dispenser
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, spot and streak free drying.
• This appliance has been designed for the use of liquid rinse
aids.
• The dosage of the rinse aid is on the inside of the tiltable door,
next to the Chamber of the dosage of dishwasher tablets.
• To make the rinse aid reservoir of accessible, turn the cap
counterclockwise, the cap is thus loosened from the filling
opening
(1)
. Pour slowly the liquid rinse aid
(2)
; the capacity
of the reservoir is about 110 ml
• You should pour in the rinse aid slowly until the level indicator
is completely black.
• You should not overfill the reservoir, it could cause the selec-
ted wash program for excessive foaming. Wipe off the remains
of the rinse aid with a damp cloth.
• Unscrew the cap clockwise back again until it locks into po-
sition
(3)
.
• If the control indicator „Rinse aid“ on the control panel on, it is
necessary to fill the detergent reservoir again.
• Important:
Even if you use detergent tablets 3 in 1, it is neces-
sary to constantly refill rinse aid into the reservoir.
