32
Using the rotary spit function
In combination with all heating types with rotary spit
function
, a rotary spit can be used.
After fitting the food on to the spit (
S
), block it with the
two forks (
F
), then proceed as follows:
•
Position the spit support as shown (
1
/
2
).
•
Fit the end of the spit into the motor (
M
) at the back of
the oven.
•
Fit the support into the circular groove in the spit (
1
).
•
Unscrew and remove handle (
A
).
• Place the oven tray with a little water on the lowest
shelf of the oven.
•
Set one of the heating types with the symbols
,
,
or
to start up the motor.
•
Close the oven door.
•
When the cooking time is up, screw the handle (
A
) on
the spit and remove everything from the oven.
If necessary, use an oven glove to avoid any burn.
See also section „Roasting / Grilling with a rotary spit“
A
Using the device
1 A
F
S
M
A
1
2
