7
KVC 4105 User Manual
EN
REMOVING & CLEANING PRE-MOTOR FILTER AND AIR OUTLET FILTER
b. Air outlet filter
Please note:
The sponge filter material in the cleaner will became dusty over time. This is normal and will not
affect the performance of the filter. If the sponge filter is so dusty that suction does not return to
100%, then we suggest that the filter be removed then rinsed under the faucet and allowed to dry for
24 hours by airing not near the fire or some high temperature objects before refitting into the vacuum.
This should be done once six months or when suction appears to be reduced obviously.
Important:
Please note that there is a safety switch inside the vacuum to prevent the unit from being run with
high vacuum rate. If the vacuum is too high ,the safety switch will be turned on. In this case, it can
minish the vacuum rate and protect the motor from being broken.
Note:
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will
overheat and could become damaged.
Important:
All filters should be checked regularly for signs of damage, preferably after each cleaning task. The
filters must be replaced immediately if they become damaged. Always disconnect the vacuum from the
electrical outlet when checking the filters.
1. Press the air outlet grid knob
to open
2. Take out the air outlet filter for
clean and change.
1
2
Rated voltage
:
220 - 240 V ~, 50 Hz
Max. power consumption
:
1600 W max.
TECHNICAL DATA
