Strona 6 z 11
rev. 1.0.1
USER MANUAL
:
KIVOS KVA01
INTELLIGENT HOME ALARM CAMERA
www.elmic.pl
,
Peripheral device
Lens (1pc):
30W CCD or CMOS wide-angle, low-light
The power indicator (1pc):
on boot up standby makes one flash in every five seconds. (Flashing in low power).
Infrared light (8pcs):
in nighttime provides infrared rays.
Light sensor:
to determine the intensity of light to decide when turn on the infrared light
Infrared detector (1pc):
detection range is 8 to 10 meters, with angle of 110°.
Buzzer:
to provide 100dB high-decibel siren
Built-in Speaker:
can record voice during playback.
TF Card:
with maximum support of 32GB
AV-OUT interface:
external TV video output
USB2.0 interface:
can be connected with computer to download pictures. (
①
download
②
an external
power supply)
Battery:
3 AA batteries (not worthy of this machine battery), and recommend the use of high
capacity alkaline battery
Display:
screen- 2.4 inch TFT, 480 * 360 high-definition display
Installation Guide
Attentions during Installation
1.
Photo sensor of alarm host does not be overshadowed by other objects or blocked.
2.
During installation probe should avoid the direct sun and car lights
3.
Recommend mounting height of 1.5 to 3 m high from ground to prevent misinformation by small animals
4.
When video alarm in the body makes lateral movement relative to lenses, the sensitivity of infrared detection is
the highest, while vertical movement is poor. So during installation it should be careful to pay attention to the
angle and height of the horizontal plane of the detector, and it has a great impact on the protected area.
5.
During installation it should be avoided to be near the cold and heat source such as hot and cold vents, air
conditioning vent, heater, air cooler and so on, and to stand directly with door
6.
The scope of protection of infrared video alarm should be straightly seen without obstacles
7.
Infrared video alarm should keep an angle of 10-30°with the wall, in this time with the farthest detection rang.
During the actual installation, to adjust the installation angle should be according to situation.
Intelligent video alarm is made of “alarm host”,
“universal bracket ", and "remote control”. It can be
placed directly on stable surface such as desktop,
bookcase, and so on, or hanged in the wall with screws,
then to adjust the appropriate angle so that the infrared
detector is in the monitoring range.
Detection range of infrared probe (Pictured)
Door ;Window;Probe
Installation location of probe in the room
Detection range (top view)
Mounting height, angle
2 m high from the ground ;10-30°
