KIVOS KDB700mk2, User Manual

Page: 14 / 16

Strona 14 z 16 rev. 1.0.1
USER MANUAL : KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM
WITH MULTI MONITOR
www.elmic.pl , elmic@elmic.pl
•
If failed to receive code in 16 seconds, exit receive code mode after one “beep” sound. Enter into the Code Menu
(Outdoor unit enters into the standby mode)
•
After code receiving finished, press ” OK ” key on code give unit to exit the code give mode, enter into the code menu.
•
Press “
EXIT
” key to return to MENU gradually, then enter into standby mode
•
After all units receive code finished, please use the No. 2 outdoor unit call all indoor monitors, if all code matched,
receive code successfully; if not, clear code of the new unit (don’t clear the code giving unit), reform the code giving
and code receiving again.
Notice:
1.Please don’t set same ID number for every indoor monitors and outdoor units.
2.The original Password for code match menu is“0000”.
3.Inform function: after match code, give code, receive code, clear code and reset ID number, please inform. Inform: tell
all units the pieces and ID numbers in the system.
4.Method of inform: outdoor unit calls all the indoor monitors (all indoor monitors should be matched), if there are two
outdoor units, use the No. 2 outdoor unit to inform.
Clear Code
(Choose “code” option, press “ OK ” key to enter into password menu)
•
Input the password to enter into code match menu (original password is 0000).If you input wrong password, system
will inform you “Password Error!”, “Please Input Again!”, enter into the code match menu until input the right
password
•
Press “ ↑ / ↓ ”key -
》
choose “Clear Code” -
》
press “ OK ” key, enter into clear code menu.
•
Press “ ↑ / ↓ ”key -
》
choose “Clear” (press “Back” to exit if you don’t want to clear anything ), system will return to code
menu automatically after code clear confirmed
n. Format
Enter into SD format menu.
•
Press“↑/↓”key -
》
set up “Yes” or “No” -
》
press ”OK” key to confirm and exit
•
Press “EXIT” key to turn back to standby mode
o. Version
Enter into Version menu.
•
Press “ OK ” key to view version, return to setup menu automatically in 2 seconds
•
Press “ EXIT ” key to turn back to standby mode step by step
p. Exit
Press “EXIT” key to turn back to standby mode