KIVOS KDB700mk2, User Manual

Page: 12 / 16

Strona 12 z 16 rev. 1.0.1
USER MANUAL : KIVOS KD700mk2 MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM
WITH MULTI MONITOR
www.elmic.pl , elmic@elmic.pl
b. Auto-vd
Enter into “Aut-vd” to set up video.
•
Press“↑/↓”key -
》
set up “Auto video” or “Manual video” -
》
press ”OK” key to confirm and exit. Default setting is
auto video (with SD card) and manual photo.
•
Press “EXIT” key to turn back to standby mode step by step.
Notice: Auto video: If nobody replies in 5 seconds after connection, the indoor monitor starts up auto video (Factory
default is auto video, if manual video is set, video recorded after calling) till being stopped or max. record time.
c. Photo
Turn into photo menu and operate.
•
If there is no TF card, screen displays “No SD Card” and turns back to main menu.
•
If there is TF card but no photo record, screen displays “No File!” and turns back to main menu.
•
If there is TF card and photo records, screen displays photo list by time order, newest file is listed on the top.
•
Choose operating command “View”, “Set As Background”, “Delete”, “Delete All” or “Back” by pressing “
↑
/
↓
”-
》
press
“ OK ” to turn into operating.
•
In View mode -
》
press “ ↑ ” to view the last photo, press “ ↓ ” to view the next photo
•
After operation, press “ EXIT ” to turn back to photo operation menu.
d. Record
Turn into “Record” to check call history.
•
If there is no call history, screen displays “No Record”.
•
Choose operating command “Play” or “Delete” by pressing “ ↑ / ↓ ”, press “ OK ” to turn into operating
•
If there is no TF card, choose command “Play”, the screen displays “No Video File!” and turns back to Call History
menu.
•
In Play mode -
》
press “ Ok ” to pause and play -
》
press “ EXIT ” to exit
•
When choose “Play” and if there is not TF card, screen displays “No Video File!” and turns back to Call History Menu.
•
In Play mode -
》
press “ OK ” to pause and play -
》
press “ EXIT ” to exit.
•
After operation, press “ EXIT ” to turn back to call history operation menu.
Note: Unplug the power and reset, all the call history will disappear.
e. Language setup
Enter into Language menu.
Press“↑/↓”key -
》
set up “Language” -
》
press ”OK” key to confirm and exit
Press “EXIT” key to turn back to standby mode
f. ID
Enter into Own ID Number to set up ID.
•
Press“
↑
/
↓
”key
-
》
set up ID number
-
》
press ” OK ” key
-
》
confirm and exit ID Number setup menu
•
Press “ EXIT ” key to turn back to standby mode step by step.
Notice: Please don’t repeat ID number for every indoor monitors and outdoor units.
g. Standby
Enter into Backlight Time menu to set up standby time, exit menu automatically after setup.
Press“↑/↓”key-
》
increase and reduce standby time(10s-60s) -
》
press ”OK” key to setup and return to Backlight Time
Setup menu.
Press “EXIT” key to enter into the standby mode.
h. Time
Enter into Time and Date Setup menu.
•
Press “ MENU ” key to choose figure of time or date.
•
Press“
↑
/
↓
”key to adjust the figure
•
Press “
OK
” key to set up and return to Date Setup menu
•
Choose “Show”, set “Y”, date will show. Set “N”, date will not show
•
Press “ EXIT ” key to enter into the standby mode