Main menu -> Settings -> Channel -> Channel
installation mode
Select a mode, select Antenna.
Go to Main Menu -> Settings -> Channel ->
Channels.
Start scanning in the selected mode.
Main menu -> Settings -> Channel -> Channel
installation mode
Select a mode, select Cable TV.
Select Main Menu - Settings - Channel -
Channels.
Antenna
Cable
Select the channel scan mode, with a choice
of local operators and the default scan
mode.
Channel scan: automatic search with the
ability to set some parameters (Advanced,
Full, Fast).
Single RF Channel Scan: Manual Scan
You can also manually tune the channels if
necessary or change their distribution in
the list.
Note:
The aspect ratio mode in the "Full
Screen" image settings is intended for use
with external sources connected via HDMI (in
particular, a PC). The work of broadcast
channels with this setting may differ from
standard work.
System settings and functions
Inputs:
Configuring TV operation with
external devices.
Control HDMI devices:
Activates the
submenu of HDMI CEC functions.
CEC/ARC:
Consumer Electronics Control
(CEC) - consumer electronics management.
ARC is an updated CEC technology and
stands for Audio Return Channel.
By connecting an ARC / CEC-enabled device
to the HDMI ARC port on your TV, you can
control the power, volume, and other
functions using your TV remote. In most
cases, it will also be easy to transfer the TV
sound to the device automatically, without
turning off the built-in TV speakers. The
connected device must also support ARC
for this function to work.
Activate the function in HDMI settings
Automatically disconnect device:
discon-
nect HDMI devices together with the TV.
Automatically turn on the TV:
automatically
turn on TV with HDMI device.
HDMI EDID ver.:
setting the EDID version.
Signal sources (inputs)
15
EN