27
Keep oils and lubricants out of the reach of unauthorized
personnel; read the instructions on the containers care-
fully and follow them without fail; avoid direct contact
with skin and rinse well after use.
m
Accident prevention standards
The machine must only be operated by qualified person-
nel, who are familiar with the contents of this manual.
Please check that the safety devices are whole and work-
ing correctly before using the machine.
You should also familiarize yourself with the machine‘s
control mechanisms, by reading the operating instruc-
tions carefully before using the machine.
The machine‘s stated performance must not be exceeded.
The machine must never be used for any purpose other
than the one for which it is intended.
In accordance with the regulatory laws of the country,
in which the machine is used, personnel must also wear
working clothes as prescribed in that country; i.e. do not
wear loose, flittering clothes, belts, rings and necklaces;
long hair should preferably be tied back.
The work area should always be kept as neat and clean
as possible, and tools, accessories and screw wrenches
must always be within easy reach.
During cleaning and maintenance work, the machine
must never be connected to the electric mains.
Never
operate the machine without the safety devices or
with the safety mechanisms turned off.
Never
remove or modify the safety devices.
Do not carry out any maintenance or adjustment work be-
fore carefully reading this manual.
The periodical maintenance plan specified in this manual
must be observed, both safety reasons and for the effi-
cient operation of the machine.
Always keep the safety labels clean and legible and pay
attention to them without fail to prevent accidents; if the
safety labels are damaged or lost, or are among the parts,
which have been replaced, they must be replaced with
new, original labels, and be affixed to the specified posi-
tion; you can obtain new labels from the manufacturer.
In the event of fires, only use powder fire extinguishers.
Do not extinguish fires in the machine with water; other-
wise, there is a risk of a short circuit.
If the fire cannot be extinguished immediately, pay atten-
tion to leaking liquids.
In the event of a longer fire, the oil tank or the lines,
which are under pressure, can explode: therefore, make
sure you do not come into contact with leaking liquids.
