23
SETTINGS
1. To change some display settings, select "SETTINGS" from the main menu menu by turning the
"Functions" knob.
2. Confirm by pressing
: the display shows which settings can be changed (language, volume of
acoustic signal, display brightness, time, energy saving function, power).
3. The setting to be changed by turning the "Browse" knob.
4. Press button
to confirm.
5. Follow the instructions of the display to change the settings.
6. Press button
; a message appears on the display confirming your selection.
N.B:
when the oven is switched off, if the ECOMODE (energy saving) function is selected (ON), the
display switches off after a few seconds. If, on the other hand, the function is not selected (OFF), after a
few seconds the display is merely dimmed..
KEY-LOCK
This function can be used to lock the control panel buttons.
To activate it, press
and
at the same time for at least 3 seconds.
If activated, the functions of the buttons are locked and the display shows a message and the symbol
.
This function can also be activated during cooking.
To deactivate it, repeat the above procedure. When the key-lock function is activated, the oven can only
be switched off by turning the knob to 0 (zero). In this case, however, the previously selected function will
have to be set again.
Instructions for oven use
FAVOURITES
This oven allows you to memorize the settings used to cook
your favourite dishes.
At the end of cooking, if you wish to save the settings used
(function, time, temperature...), press the
button.
At this point, the display shows the message "Presse
to
save".
Press button
and the oven will propose the first available
position from 1 to 10. If you wish to customize the position, you
can change the number by turning the "BROWSE" (+/-) knob
before confirming your choice with button
.
When the memory is full or the position is already in use, the
function is overwritten.
If, on the other hand, you do not wish to memorize the settings,
simply press the button
, proceed to another function by
turning the "BROWSE" knob or switch off the oven. To subsequently view saved settings, turn the
"FUNCTIONS" knob until the display shows the symbol
then select one of the stored functions,
turning the "BROWS" (+/-) knob until the desired function is displayed.
Press button
followed by button
to start cooking.
Press to
save to
cancel
Favourite has been saved
Forced air
2
Press to
save to
cancel
