E
N
G
LI
S
H
usinG The ToasTer
Turn the Shade Dial to select the degree
of darkness you want. Rotate the Shade
Dial clockwise for darker toast, counter-
clockwise for lighter. Shade settings 1-3
are light, 4-6 are medium, and 7-9 are
dark.
Push the lift lever down until the bread is
lowered as far as possible, then turn the
On/Off Switch momentarily to the “On”
position. The switch will spring back to
the middle position and the function
light will glow, indicating the toasting cycle has started.
Note:
Toaster will automatically shut off if the On/Off Switch is held in the “On”
position more than 15 seconds.
When the toasting cycle is complete, a tone will sound and the function light will stop
glowing. The toast will remain in the warm toasting cavity until the lever is raised.
4.
5.
6.
to Check toasting Progress
To check the progress of your toast during a toasting cycle, raise the manual lift lever.
Raising the lift lever will not cancel the toasting cycle, enabling you to simply lower
the bread if additional browning is required. If you remove the bread before a toasting
cycle is complete, don’t forget to cancel the cycle by turning the On/Off Switch
momentarily to the “Off” position. If you forget to cancel the cycle, the Toaster will
automatically shut off at the end of the cycle time.
Note:
Operating the Toaster without bread will not harm the Toaster.
to Cancel toasting Cycle
To cancel the toasting cycle at anytime, turn
the On/Off Switch momentarily to the “Off”
position. The function light will stop glowing
and the toasting cycle will end.
