ENGLISH
USING THE ICE CREAM MAKER ATTACHMENT
|
7
3
Fit the freeze bowl in place over the
locating pins. Press down on the back
of the freeze bowl until the bowl pin
snaps into the spring latch.
NOTE:
The freeze bowl is designed to
fill all bowl-lift mixers. If the bowl pin
at the back of the bowl is too short
or too long to snap into the spring
latch, remove and rotate the bowl so
the opposite bowl pin faces the spring
latch. Repeat step 3.
USING THE ICE CREAM MAKER ATTACHMENT
4
Place the dasher inside the
freeze bowl.
ATTACHING THE DRIVE ASSEMBLY FOR BOWL-LIFT MIXERS
1
Be sure the Stand Mixer is off
and unplugged.
2
Make sure the bowl-lift handle is still
in the down position and the freeze
bowl and dasher are in place.
W11111749A_EN_v07.indd 7
5/31/17 9:18 AM
