12
| TIPS FOR GREAT RESULTS
USING THE MULTIPURPOSE BLADE
TIPS FOR GREAT RESULTS
To chop fresh fruits or
vegetables:
Peel, core, and/or remove seeds. For
more consistent results, cut food in 1 to
1½-inch (2.5-3.75 cm) pieces. Process food
to desired size, using Pulse or Low speed.
Scrape sides of bowl, if necessary.
To puree cooked fruits and vegetables
(except potatoes):
Add 1/4 cup (60 mL) liquid from recipe per
cup (235 mL) of food. Process food, using
short pulses, until finely chopped. Then
process continuously until reaching desired
texture. Scrape sides of bowl, if necessary.
To prepare mashed potatoes:
Shred hot cooked potatoes using the
shredding disc. Exchange shredding disc
for multipurpose blade. Add softened
butter, milk, and seasonings. Pulse three to
four times, 2 to 3 seconds each time, until
potatoes are smooth and milk is absorbed.
Do not overprocess.
To chop dried (or sticky) fruits:
The food should be cold. Add 1/4 cup
(60 mL) flour from recipe per 1/2 cup
(120 mL) dried fruit. Process fruit, using
short pulses, until reaching desired texture.
To finely chop citrus peel:
With sharp knife, peel colored portion
(without white membrane) from citrus.
Cut peel in small strips. Process until
finely chopped.
To mince garlic or to chop fresh herbs
or small quantities of vegetables:
With processor running, add food through
the feed tube. Process until chopped. For
best results, make sure work bowl and
herbs are very dry before chopping.
To chop nuts or make nut butters:
Process up to 3 cups (710 mL) of nuts
to desired texture, using short pulses,
1 to 2 seconds each time. For a coarser
texture, process smaller batches, pulsing
once or twice, 1 to 2 seconds each time.
Pulse more often for finer texture. For
nut butters, process continuously until
smooth. Store in refrigerator.
NOTE:
Processing nuts and other hard
foods may scratch the surface finish on
the inside of the bowl.
To chop cooked or raw meat, poultry,
or seafood:
The food should be very cold. Cut in
1-inch (2.5 cm) pieces. Process up to
1 pound (455 g) at a time to desired size,
using short pulses, 1 to 2 seconds each
time. Scrape sides of bowl, if necessary.
To make bread, cookie, or cracker crumbs:
Break food into 1½ to 2-inch (3.75-5 cm)
pieces. Process until fine. For larger pieces,
pulse two to three times, 1 to 2 seconds
each time. Then process until fine.
To melt chocolate in a recipe:
Combine chocolate and sugar from recipe
in work bowl. Process until finely chopped.
Heat liquid from recipe. With processor
running, pour hot liquid through the feed
tube. Process until smooth.
To grate hard cheeses, such as
Parmesan and Romano:
Never attempt to process cheese that
cannot be pierced with the tip of a sharp
knife. You can use the multipurpose
blade to grate hard cheeses. Cut cheese
in 1-inch (2.5 cm) pieces. Place in work
bowl. Process, using short pulses, until
coarsely chopped. Process continuously
until finely grated. Pieces of cheese can
also be added through the feed tube while
the processor is running.
W11103322B_ENv01.indd 12
11/29/17 4:33 PM
