background image

24

LENGTH OF
WARRANTY

TWO YEAR FULL
WARRANTY
FROM DATE OF
PURCHASE

THIRD THROUGH
FIFTH YEAR LIMITED
WARRANTY
FROM DATE OF
PURCHASE

THIRD THROUGH
TENTH YEAR
LIMITED WARRANTY
FROM DATE OF
PURCHASE

KITCHENAID
WILL NOT PAY FOR

A. Service calls to:

1. Correct the installation of the dryer,

including venting. Heavy four-inch
metal exhaust vent must be used.
Refer to the venting section of this
manual and your Installation
Instructions.

2. Instruct you how to use the dryer.
3. Replace house fuses or correct

house wiring.

4. Correct house plumbing.

B. Repairs when dryer is used in other

than normal home use.

C. Damage resulting from accident,

alteration, misuse, abuse, improper
installation (including, but not limited
to, venting with plastic or flexible foil),
or installation not in accordance with
local electrical or plumbing codes.

D. Any labor costs during limited

warranties.

E. Replacement parts or repair labor

costs for units operated outside the
United States.

F. Pickup and delivery. This product is

designed to be repaired in the home.

G. Repairs to parts or systems caused

by unauthorized modifications made
to the appliance.

KITCHENAID
WILL PAY FOR

Replacement parts and repair labor
costs to correct defects in materials
or workmanship. Service must be
provided by an authorized
KitchenAid servicing outlet.

Replacement parts for any electrical
element on electric models or any
burner on gas models to correct
defects in materials or workmanship.

Replacement of the motor due to
defects in materials and workmanship.

Replacement parts for SELECTRA™
controls if defective in materials or
workmanship.

Replacement parts for the dryer
drum if it rusts due to defects in
materials or workmanship.

Replacement parts for the dryer
top/cabinet assembly should any sign
of rust appear due to defects in
materials or workmanship.

PART NO. 3405630 Rev. A
CARD NO. 2195265

10/96

Printed in U.S.A.

® Registered Trademark of KitchenAid, U.S.A

© 1996 KitchenAid

D r y e r   W a r r a n t y

6/96

KITCHENAID DOES NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. 
Some states do not allow the exclusion or limitation of incidental or consequential damages, so this
exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have
other rights which may vary from state to state.

Outside the United States, a different warranty may apply. For details, please contact your authorized
KitchenAid dealer.

If you need assistance or service, first see the “Troubleshooting” section of this book. After checking “Trouble-
shooting,” additional help can be found by checking the “Requesting Assistance or Service” section. In the
U.S.A., call our Consumer Assistance Center at 1-800-422-1230.

KitchenAid

Benton Harbor, MI 49022-2692 U.S.A.

Summary of Contents for KEYS677E

























Reviews: