4-26
REMOVING AN OVEN DOOR
CAUTION:
Do not lift the oven door by its
handle.
To remove an oven door:
1.
Open the oven door to its fully open posi-
tion.
2.
Rotate the door locking mechanism to the
unlocked (up) position.
3.
Close the oven door to its first stop.
4.
Grasp the sides of the door and lift the door
until it stops, then pull the hinge hangers
out of the slots.
To reinstall an oven door:
1.
Grasp the sides of the door and tilt it back
at a slight angle, then insert the hinge
hangers into the hinge slots as far as they
will go.
2.
Rotate the top of the door towards the
range so the hinge hangers fit onto the
support pins.
3.
Close the oven door and make sure that
the hinge hangers are fully seated on the
support pins. If they are not seated prop-
erly, the door will not close tightly and may
be off-center. To seat the hinge hangers,
open the door slightly, and push in on the
bottom until the hangers are fully seated.
4.
Open the oven door to its fully open posi-
tion and rotate the mechanism down to the
“locked” position.
5.
Close the oven door.
Door Locked
Latch Down
Door Unlocked
Latch Up
Summary of Contents for KDRP487MSS - 48" Pro-Style Dual Fuel Range W
