5
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
20 lb LP Gas Models
Tools Needed
Parts Supplied
■
Gas pressure regulator/hose assembly set for 11" WCP LP
gas (attached to manifold)
■
1 single-prong plug/5,000 mAmp transformer assembly
■
Convertible regulator set for 4" WCP Natural gas
■
Orifices for Natural gas conversion
■
LP gas fuel tank tray
Parts Needed
■
20 lb LP gas fuel tank - approximately 18" (45.7 cm) height
and 12" (30.5 cm) diameter
Natural Gas Models
Tools Needed
Parts Needed
■
Gas line shutoff valve
■
½" male pipe thread nipple for connection to pressure
regulator
■
LP gas-resistant pipe-joint compound
■
CSA design-certified outdoor flexible stainless steel
appliance connector (4-5 ft [1.2-1.5 m]) or rigid gas supply
line as needed.
Parts Supplied
■
Convertible regulator set for 4" WCP Natural gas.
■
Single-prong plug/5,000 mAmp transformer assembly
■
Tape measure
■
Small, flat-blade screwdriver
■
Flat-blade screwdriver
■
#2 and #3 Phillips screwdriver
■
Level
■
Wrench or pliers
■
Pipe wrench
■
Scissors or cutting pliers
(to remove tiedowns)
■
Noncorrosive leak-
detection solution
■
Tape measure
■
Small, flat-blade screwdriver
■
Flat-blade screwdriver
■
#2 and #3 Phillips screwdriver
■
Level
■
Wrench or pliers
■
Pipe wrench
■
Scissors or cutting pliers
(to remove tiedowns)
■
Noncorrosive leak-
detection solution
