2-23
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
REMOVING THE HIDDEN BAKE ELEMENT
CAUTION:
When you work on the dual fuel
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
WARNING
FIRE HAZARD
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
1.
Turn off the gas and electrical power going
to the range.
2.
Pull the range away from the wall so that
you can access the rear panel.
3.
Remove the braces and rear panel from
the range (see page 2-17).
5.
Bend the cover flanges down as far as
they will go.
6.
Use a pen knife or a single-edged razor
blade and cut the insulation blanket, as
shown. Be sure to separate the insulation
blanket as cleanly as possible.
Cut Insulation Blanket
Bend Cover
Flange Down
Bend Cover
Flange Down
4.
Remove the four screws from the hidden
bake element cover flanges.
Cover Flange
& 2 Screws
Cover Flange
& 2 Screws
Continued on the next page.
