4.
Align the bottom keyhole slots on the side shelf, left
with the loosened screws. Hook the side shelf, left onto
the two loosened screws and let the shelf slide down so
the screws are in the narrow neck of the slots, Tighten
these two screws, see below (A)
5.
Attach 3 screws from firebox inside to side shelf, and
tighten, see below (B).
6.
Attach the side shelf, left to the main control panel by
inserting the screw which was removed from Step 2
and tighten, see (C) below.
A
B
C
Attach Left Side Shelf
1. Unpack side shelf, left and side shelf front
panel, left. Attach side shelf front panel, left with the
preassembled screws to the side shelf, left using
the pre-drilled holes, and tighten.
2. Loosen but do not remove the 3 screws on the
side shelf, left.
IMPORTANT
: This step is meant to help with the
installation, but do not depend solely on the two
screws to hold the weight of the side
shelf.
A
3. Loosen but do not remove the 2 screws on the
side panel, left (A). Remove the screw on main
control panel (B).
B
15
