20
| TROUBLESHOOTING
4
You can store up to two blades
and three disks, as well as the drive
adapter inside of the work bowl
when the Food Processor is not in
use� Wrap the power cord around
the cord storage on the bottom of
the base, then secure the plug by
clipping it to the housing�
CARE AND CLEANING
NOTE:
If washing the food processor
parts by hand, avoid the use of abrasive
cleansers or scouring pads� They may
scratch or cloud the work bowl and cover�
TROUBLESHOOTING
Food Processor not shredding
or slicing properly:
1.
Make sure the raised-blade side of
the disk is positioned face up on the
drive adapter�
2.
Make sure ingredients are suitable
for slicing or shredding� See the “Tips
for Great Results” section�
3.
Make sure the disk is positioned in the
process position (near the top of the
bowl), and not the storage position (low
and inside of the bowl)�
If the work bowl cover won’t close
when using the disk:
1.
Make sure the disk is installed correctly,
and is positioned properly on the drive
adapter�
If the problem is not due to one of the
above items, see the “Warranty and
service” sheet�
Do not return the Food Processor to the
retailer� Retailers do not provide service�
If your Food Processor should
malfunction or fail to operate, check
the following:
1.
Is the Food Processor plugged in?
2.
Make sure that the bowl and lid are
properly aligned and locked in place�
3.
Have you pressed more than one
button at the same time?
4.
Unplug the Food Processor, then plug
it back into the outlet�
5. Is the fuse in the circuit to the
Food Processor in working order?
If you have a circuit breaker box, be
sure the circuit is closed�
6. The Food Processor may need to cool
to room temperature.
If the speed light turns off and the
O/Pulse light flashes, wait until the
O/Pulse light turns off and retry� The
Food Processor may take from 5-15
minutes to cool completely�
7. The motor may be locked.
If the speed light stays on while
the O/Pulse light flashes, press the
O/Pulse button to reset the motor�
©2019 All rights reserved�
Specifications subject to change without notice�
W11338648B.indb 20
4/17/2019 7:14:52 PM