Shock Accelerometer
Page 4
002-096e-01.19
* Do not drop the instrument.
* Store in the case provided and in a clean, dry environment.
* Power the instrument in accordance with the instructions in
section 6 of this manual.
3.2
Precautions
Kistler sensors are thoroughly tested before leaving the factory. To
maintain safe and reliable operation, it is important to follow the
instructions herein.
* Do not mount accelerometers on high voltage surfaces.
* Keep cable clear of power lines and open machinery.
* Never operate or store the unit beyond the specified temperature
range.
* Do not exceed the maximum specified current.
* Never exceed the maximum specified voltage.
* Follow the instructions for mounting. Do not over tighten.
* When not in use, store the accelerometer in the container supplied.
Always store in a clean, dry area.
* Keep the connector clean and covered when not in use
• Exercise care during cable connection. Cable connector center pin
should align with the female receptacle on the accelerometer.
* Follow the recommendations in section 7.4
3.3
Using This Manual
Information contained herein includes a technical description,
installation and operating instructions, powering and considerations
for cable length. Section 8 contains a listing of mounting accessories
and cables available to assist with your measurement needs.
It is recommended that the entire manual be read prior to installation
and operation of shock accelerometers. The user who has prior
experience with Piezotron type accelerometers may want to confine
reading to particular sections of interest.
We have endeavored to arrange these instructions in a manner that
allows for easy location of topics of interest. Your Kistler
representative is also available to assist with any questions.
Information contained herein may be subject to change.
