KisanKraft
®
Agricultural Inter-Cultivator
KK-IC-100P / 105P /200P / 205P / 207P / 215P
: +91.80. 6835 7800
Page 17 of 112
•
Gripping the clutch handle, the engine
will work on the converted gear.
F.
Use of a Hitch Box:
Install the hitch attachment in the hitch box with
a hitch pin.
(1) Hitch Box
(2) Hitch Pin
G. Front Wheel:
Move the Inter-cultivator on road by the front
wheel; lift the handlebars up the ground the
front wheel.
When the Intercultivator is used in the field,
move the wheel up by replacing the lock pin.
(1) When used in the field
(2) Lock Pin
(3) When moved on road
H. Handling Tips:
Adjust the handlebar height to a comfortable position (waist height for normal weeding).
Should the machine jerk forward while weeding. Press down the handlebars. If the
machine does not move forward, move the handlebars from side to side.
Turn:
The proper method of negotiating a turn during a weeding operation is to lower the
handlebars to bring the gravity center towards the rear and then make the turn, this will
permit a turn to be made with relative ease.
I.
Normal Operating Angle:
Lower the handle slightly so that the
front of the machine is raised about 6-
8°
To get the maximum advantage from
the Intercultivator, try to hold the
machine at an angle shown while you
are weeding the ground.
CAUTION
:
•
Do not use the Inter-cultivator with a rotor whose diameter is in excess of 300mm.
•
Operating the Intercultivator on grades could cause the Intercultivator to trip over.
•
Allowing any one to operate this Intercultivators without proper instruction may
result in injury.
