KisanKraft
®
Diesel Engine- Vertical
KK-DEV-370F/378F/386F
: +91.80. 22178200
Page 19 of 28
Stopping the Engine
1.
Set the governor lever to low speed
position, then run the engine at no load for
5 minutes.
2.
Set the governor lever to the “STOP”
position. Do not stop the engine with the
decompression lever.
3.
Set the fuel cock to “OFF” position.
4.
Pull the recoil starter handle slowly, until
you feel resistance. (At this point, the
decompression just begins and
intake/exhaust valves are both closed, thus
the cylinder can be prevented from rust.)
5.
Concerning the electric starting engine,
directly turn the starting ke
y to “CLOSE”
positon.
Prepare For The Next Operation
:
1.
Fill diesel in to the tank.
2.
Check all the bolts and nuts. Screw on them if necessary.
3.
Clean the dirt on the surface of the engine body.
Maintenance
Periodical check and maintenance are very important for maintaining the performance
and life of the engine. Follow the table given below:
Intervals
Items
Every
day
20 hrs
50 hrs
100
hrs
200
hrs
500
hrs
1000 hrs
Check all
the bolts &
nuts
Check
and refill
engine oil
Replace
engine oil
(First
time)
(Second
time)
Clean or
replace
engine oil
cleaner
(clean)
(clean)
(Replace)
