background image

At the factory, the subnet mask is: 255.255.255.0

1.

Insert unit key in key switch.

2.

Set unit key to “P”.

3.

Press and hold 

[Max.]

 and 

[Min.]

 simultaneously for four sec-

onds.

ð

The display shows 

.

4.

Press 

[Max.]

 and 

[Min.]

 to go to level 

 and confirm with

Set.

5.

Press 

[Min.]

 to select the parameter 

.

6.

Press and hold 

[Target temperature]

.

ð

The first three digits of the subnet mask are displayed.

7.

Use 

[Max.]

 and 

[Min.]

 to set the selected digits of the required

subnet mask.

ð

The number changes on the display in steps of one.

8.

Release 

[Target temperature]

.

ð

The first three digits of the subnet mask have been

entered.

9.

Press 

[Min.]

 to select the next parameter 

.

10.

Press and hold 

[Target temperature]

.

ð

The next digits of the subnet mask are displayed.

11.

At levels L57 and L58 repeat steps 6 to 10 until the subnet

mask has been entered completely.

12.

Set key switch to “1” to complete your input.

ð

The subnet mask has been set up.

Setting up the subnet mask on the

unit

 Operation

Setting up PC-KIT-NET (optional)

27.05.2021

Refrigerator/freezer LABO series

45

Summary of Contents for FROSTER LABO 330 PRO-ACTIVE












































































Reviews: