4.2 Final decommissioning of the unit
Insert unit key in key switch.
1.
Turn unit key to position “0”.
2.
Unplug power plug.
3.
Remove unit key.
4.
Leave unit door open to prevent the formation of odours and
mould.
4.3 Putting the unit back into operation
Before recommissioning, clean and disinfect the unit
“Cleaning and disinfection” on page 50
1.
Plug in power plug.
2.
Insert unit key in key switch.
3.
Turn unit key to position “1”.
ð
The Display shows the interior temperature.
4.
Check target temperature and adjust if necessary
6.2.1.2 “Displaying and changing the target temperature”
.
Lead time of the temperature alarm!
The temperature alarm is active at the earliest
when the target temperature is reached, and at the
latest after two hours of unit operation.
5.
When the unit has reached its target temperature, place the
chilled goods in the unit.
Final decommissioning of the unit
Putting the unit back into operation
Transport and decommissioning
Putting the unit back into operation
27.05.2021
Refrigerator/freezer LABO series
31