background image

Cellular Shade Collection

Vertical Cellular Shade Side Stack Installation Instructions

GETTING STARTED 

Product View ................................................................................................................................................................. 1
Tools and Fasteners Needed ........................................................................................................................................ 2

INSTALLATION 

Installation Overview .................................................................................................................................................... 2
Outside Mount Installation .......................................................................................................................................... 3
Inside/Ceiling Mount ................................................................................................................................................... 12
Valance Attachment ................................................................................................................................................... 19

OPERATION

Operating the Shade ................................................................................................................................................... 22
Troubleshooting .......................................................................................................................................................... 22

CARE

Removing the Shade, If Necessary ............................................................................................................................ 23
Cleaning Procedures ................................................................................................................................................... 23

WARRANTY

 .................................................................................................................................................................. 25

Rev. A   9/3/19

Summary of Contents for Cellular Shade Collection



























Reviews: