13
INSTALLATION
INSTALLATION
Prepare the Fabric Stack
■
■
Insert the stationary rail bracket into the vertical rail on the side where the fabric stacks.
■
➤
The bracket fits into the grooves on the rear of the vertical rail.
■
➤
Insert the bracket until it is seated and the bracket catch snaps into the hole on the back of the rail. Check that the bracket
catch is fully engaged.
■
■
Insert the stationary rail bottom bracket into the bottom of the stationary rail.
■
➤
The bracket fits into grooves at the bottom of the rail.
■
➤
Insert the bracket with the mounting flanges to the back, away from the fabric stack as shown. Do not seat the bracket;
about
1
⁄
4
" should extend from the rail.
■
➤
After inserting the bracket, peel off the red label.
Seated Bracket
Bracket Catch