﹡﹡﹡
IMPORTANT NOTICE:
DO NOT return to place of purchase!!!
Please contact Customer Service hotline at 800-913-8999 for help.
SAFETY CHECKS
STEP 1:
1.
Check connection of the regulator to the propane tank
connection. Remember, the POL adapter is a left-hand
thread. (See diagram for Step 1)
3
1
2
STEP 1.
2.
Check all connections on the hose regulator assembly
(See diagram for Step 1)
3.
Check the intake hose to make certain that
it is not kinked or in a position that could cause it to
kink. Hand tighted and then make a 1/2 turn with the
adjustable wrench. (See diagram for Step 1)
NOTE: The remaining connections are to be tested after
the heater has been lit.
STEP 2:
4.
Light the heater following instructions on page 10
and page 11.
Page8
6
8
7
9
STEP 2.
5.
Using spray bottle with soapy water, spray each of
the areas listed below to visually inspect for leaks.
leaks will be indicated by bubbles.
6.
Intake hose fitting at the bottom of safety control
valve. (See diagram for Step 2)
7.
Pilot tubing to safety control valve. (See diagram for Step 2)
8.
Orifice fitting and the safety control valve. (See diagram for
Step 2)
9.
Pilot tubing and pilot. (See diagram for Step 2)
NOTE:
After leak testing is completed and all leaks
are sealed, close the door to the tank enclosure and
your patio heater is ready to use.
Summary of Contents for PTH106SS-3G
Page 5: ......
