background image

13

14

NO.   PROBLEM            

SOLUTION

TROUBLE SHOOTING GUIDE

       The radio cannot       

 

 

 

 

 

Battery power may be insufficient.

       be switched on           Recharge  or  replace  the  battery  pack.
       or no display              Battery pack may not be installed properly. 

after

Remove the battery pack and install

       being  switch ed   o

  n

                   

 

 

 

 

i t

 

.

again.

  

 

       The battery power      The battery life is finished;
       consumes quickly       please replace it with a new battery pack.
       after charging.
 
       Cannot talk to             Make sure the CTCSS/DCS tone is the 
        or hear other              same as that of your group members.
       group members .        Out of  the  effective  communication  range.
       

       Other voices               Change the CTCSS/DCS tone, and make 
       from non-group           sure to changed the tone of all radios in  
       members are              your group.
       heard on the
       Channel.

   

        Communication         Make sure the antenna is well connected.
        range is too               Make sure the antenna is the original one.
        short.                         Check if the battery power is in normal 

                                  s  

a  

e  

.                                 

1

2

3

5

4

 Ask your local dealer to adjust the squelch
 level.

      Emergency Alert 

Press the emergency button for more than 2 seconds, and then the 
radio enters the state of emergency alert: red light flashes, and loud 
warming tone sounds.
Press the emergency button again to exit the emergency state.
In emergency state, any other keys or buttons are inactive. 

Summary of Contents for PT4200













Reviews: