Kirisun DP586 User Manual Download Page 33

Page: 33 / 37

DP586

DMR Two Way Radio

User Manual

on digital mode.

7.6 Emergency

In state of emergency, press the Emergency shortcut key to send emergency alarm.

Emergency alarm consists of two parts: alarm type and alarm mode. Alarm mode is used to specify the

contents sent to other members in emergency. You can ask your dealer to set these parameters based

on your requirements.

For exiting emergency, press again the Emergency shortcut key.

◆

Alarm Mode

Emergency Alarm: enable to send alarm and exit alarm state automatically afterwards.

Emergency Alarm + Emergency Call: after the radio sends emergency alarm, press PTT button to send

emergency call.

Emergency Alarm + Auto Background Tone: after the radio sends emergency alarm

，

the background tone

will be sent automatically in the way of emergency call.

◆

Alarm Type

Summary of Contents for DP586






































Search results

Summary of Contents for DP586

Reviews:

Related manuals for DP586

Brands by name

Popular brands

Kirisun DP586, User Manual

Search results

Summary of Contents for DP586

Reviews:

Related manuals for DP586

Brands by name

Popular brands