background image

DP586 

DMR Two Way Radio

                                User Manual 

17 

(6) When the green indicator glows, keep the battery on the charger for 1-2 hours before taking it out so as 

to achieve the optimal performance. 

(7) Take out the power adaptor from the socket of AC power output. 

Note:   

 

The battery is not charged before delivery from the factory, so please charge the battery before your 

first use. 

 

Kirisun KB-75A lithium-ion can be used for this radio. 

 

If  the  battery  which  is  stored  for  over  2  months  or  a  new  battery  is  charged  for  the  first  time,  it 

should be charged repeatedly to gain full battery capacity. The battery should be at least charged 

once every three months. 

 

When the battery is fully charged or the battery power is above the level of low power alert, do not 

charge the battery,  or it may affect the battery life and performance. Please take out the battery 

from the charger after it is fully charged. 

 

When the radio enters the state of low voltage alarm, please charge the battery before using it and 

do not force to power on the radio in case that the battery life and performance is impaired. 

 

There is protection circuit inside KB-75A lithium battery. The power supply will be cut off in state of 

Summary of Contents for DP586






































Reviews: