VI-MMXII
Page 4
7.
Replacement parts will have a 90-day warranty or the remainder of the KMI warranty period,
whichever is longer. Parts must be installed by an authorized dealer or agent of KMI.
8.
Any removed parts must be marked with serial number of the unit, date of repair and warranty
number.
9.
Parts must be held by the dealer upon request of KMI for 30 days.
10.
Parts may be requested by KMI to be returned to KMI or a supporting vendor.
a.
Supporting vendor - A return goods authorization (RGA) and warranty claim number
will be issued.
b.
KMI - Warranty claim number will be issued.
11.
If deemed defective by KMI, parts with an RGA/Warranty claim number will be reimbursed,
replaced or credited back to the dealer at the net dealer cost.
12.
Parts invoice for warranty goods received will be requested with warranty. If a part is
purchased outside of KMI proof of purchase will be required for reimbursement.
13.
The following are not covered under this warranty:
c.
Overtime, freight and travel.
d.
Rental fees for loaner equipment to the end customer.
e.
Other out of pocket expenses incurred during downtime.
f.
Overnight/priority shipping.
g.
Damages or repairs to tractors used with KMI equipment.
h.
Truck and all truck parts/components (truck mounted models).
i.
Normal wear and tear for normal replacement parts, cutting knives, exterior finish,
chains, hydraulic oil & filters, belts, sprockets, u-joints etc.
j.
Scale Systems have their own warranty and are not included in Kirby's limited warranty
coverage. The warranty stated by the scale manufacturer will be honored by KMI. This
does not include any freight, service calls or loaner unit for the specified repair. Scale
warranty is outlined in the Scale System’s owner's manual.
k.
All parts requiring periodical maintenance, that have not been (but not limited to):
➢
Greased (bearings, PTO & driveline u-joints).
➢
Nuts and bolts tightened.
➢
Chains adjusted.
➢
Oil changed.
➢
Filter changed.
➢
Hydraulic hoses tightened.
14.
Tires, wheels and batteries have a limited warranty of 3 months from the date of original sale
and warranty acceptance form. This includes oil seals for the axle hub. This does not include
any flats or damage caused by negligent use or foreign objects.
15.
Electrical switches and controls installed by KMI are covered against defect in workmanship
for a period of one year under normal use. Part component switches are covered for 30 days.
PRODUCT IMPROVEMENTS:
KMI reserves the right to make improvements and changes in
material and / or design of its products with no obligation to incorporate such improvement into
previously manufactured equipment.
Summary of Contents for LP1000
