VII-MMIX
Page 19
PERFORMING MAINTENANCE (CONT.):
Always use a safety support and block the wheels. Never use a jack to support the machine.
Always use the proper tools or equipment for the job at hand.
Use extreme caution when making adjustments.
Never use your hands to locate hydraulic leaks on attachments. Use a small piece of
cardboard or wood. Hydraulic fluid escaping under pressure can penetrate the skin.
When disconnecting hydraulic lines, shut off hydraulic supply and relieve all hydraulic
pressure.
Openings in the skin and minor cuts are susceptible to infection from hydraulic fluid. If
injured by escaping hydraulic fluid, see a doctor at once. Gangrene can result. Without
immediate treatment, serious infection and reactions can occur.
Replace all shields and guards after servicing and before moving.
After servicing, be sure all tools, parts and service equipment are removed.
Do not allow grease or oil to build up on any step or platform.
Never replace hex bolts with less than grade five (5) bolts unless otherwise specified.
Where replacement parts are necessary for periodic maintenance and servicing, genuine
factory replacement parts must be used to restore your equipment to original specifications.
Kirby manufacturing will not claim responsibility for use of
unapproved parts
and/or
accessories and other damages as a result of their use. This will void your warranty.
If equipment has been altered in any way from original design, Kirby manufacturing does
not accept any liability for injury or warranty.
A fire extinguisher and first aid kit should be kept readily accessible while performing
maintenance on this Bale Wagon.