Kipor SINEMASTER IG4300, Owner'S Manual

Page: 27 / 50

21
With the voltage switch in the 120/240V position, the parameters will be different as the display looks
at both 120V AC legs
1 . Total Voltage (both legs)
2. Single Voltage leg A
3. Single Voltage leg B
4. Leg A current value
5. Leg B current value
6. Frequency
7. Accumulated operating hours
8. Battery Voltage
Service Reminders :
When the specified service interval is reached, the display the following codes:
SV1 Change oil
SV2 N/A (diesel models)
SV3 Service air cleaner
SV4 N/A (diesel models)
SV5 Adjust valve clearance
SV6 Check fuel tank and fuel lines
To see the prescribed service intervals, see chapter 7, Maintenance.
When a service reminder is displayed, you can press the selection button to restore the operating
parameter however the service code will be displayed again in two seconds. After the specified
maintenance item is addressed, the code can be cleared by holding down the selection button for five
seconds and the service interval clock will be reset.
Do not ignore the service reminder and have the scheduled preventive
maintenance performed.. Serious engine damage may result otherwise.