background image

1

Carbon monoxide hazards

Exhaust contains poisonous carbon monoxide, a colorless and odorless 
gas.Inhaling exhaust can cause loss of consciousness and lead to death.
If you run the generating set in unventilated or confined place, the air you 
breathe could contain a dangerous amount of exhaust gas. So, be sure to 
keep the good ventilation to prevent the exhaust gas from building up.

Operator
Responsibility:

For the safety of the operator and others, be sure  to operate the 
generating set carefully.

Know how to stop the generating set quickly in case of emergency. Master 

the usage and connection procedures of all generating set controllers, 

output receptacles. Be sure that the operator must receive proper 

instruction. The children or the pets are forbidden to close to the generator.

The operation including installation, running and maintenance should be 

done by professional people who know well about the feature of generator.  

Fire and burn hazards

The exhaust gets hot enough to ignite some materials. The gen-erating set 
must be kept at least 1 meter away from buildings and other equipments.
Keep flammable materials away from the generating set. Be sure to service or 
store the generating set in doors after the engine cooled.
The fuel is flammable and fuel vapor can explode. Refuel in a well-ventilated 
place with the engine stopped. Keep the flames and sparks away, and do not 
smoke in the area.
Fuel may spill and ignite if the generating set is tilted or overturned. Place the 
generating set on a firm, level surface. Avoid loose sand or snow.
It is limited to use the generator in the high-hazard risk area.
Some  parts of the explosive motor are very hot. Failure to operate could lead 
to burn. Please note the warning stickers on the generator.
Operators should have self-protection awareness when operating generator, 
please wear sound-proof ear shield, insulating boot and insulating gloves.
The key of door lock and electric door accessories for meter door and 
maintenance door should be well kept by operators. Please lock the doors of 
generator tightly to prevent somebody to operate (the children can not realize 
the danger).

WARNING

WARNING

Electric shock hazards 

The generating set will produce enough electric current to cause a serious 
shock or electrocution if misused. Running the generating set in the wet 
places such as rain, snow, swimming pool or sprinkler system, or when your 
hands are wet, could result in electrocution. Do not connect to the building's 
power system without installation of the isolation switch performed by a 
qualified electrician.

WARNING

1. SAFETY INFORMATION

4. KDE16EA3, 

KDE19EA3

Electrical wiring diagram of 

36

Summary of Contents for KDE16EA

























Reviews: