background image

10. TRANSPORTING STORAGE

To prevent fuel spillage when transporting or during temporary storage, the generator 
should be secured upright in its normal operating position, with the engine switch OFF.
The fuel cap vent lever is turned counterclockwise to the  OFF  position.
Allow the engine to cool well before turning the fuel cap vent lever to the OFF position.

WARNING

When transporting the generator:

Do not overfill the tank (there should be no fuel in the filler neck).
Do not operate the generator while it is on a vehicle. Take the generator off the 
vehicle and use it in a well ventilated place.
Avoid a place exposed to direct sunlight when putting the generator on a 
vehicle. If the generator is left in an enclosed vehicle for many hours, high 
temperature inside the vehicle could cause fuel to vaporize resulting in a 
possible explosion.
Do not drive on a rough road for an extended period with the generator on 
board. If you must transport the generator on board. If you must transport the 
generator on a rough road, drain the fuel from the generator beforehand.

Before storing the unit for an extended period:
1. Be sure the storage area is free of excessive humidity and dust.
2. Drain the fuel.

WARNING

Gasoline is extremely flammable and explosive under certain conditions.
Do not smoke or allow flames or sparks in the area.

SCREW DRIVER

-

-

Smart throttle
Engine speed is kept at idle automatically when the electrical appliance is disconnected 
and it returns to the proper speed to power of the electrical load when electrical 
appliance is connected. This position is recommended to minimize the fuel consumption 
while in operation.

WARNING

Smart throttle system does not operate effectively, if the electrical appliance 
requires the momentary electric power.
When high electrical loads are connected simultaneously, turn the Smart- 
throttle switch to the OFF position to reduce voltage vibration.
In DC operation, turn the Smart-throttle switch to the OFF position.

OFF:

Smart-throttle system does not operate. Engine speed is kept over rated speed.

ON

OFF

OFF

ON

Summary of Contents for IG2000P



























Reviews: