a. Drain all gasoline from the fuel tank into an approved gasoline container.
b. Turn the engine switch ON, and loosen the carburetor drain screw and drain the
gasoline from the carburetor into a suitable container.
c. With the drain screw loosened remove the spark plug cap, and pull the starter grip 3
to 4 times to drain the gasoline from the fuel pump.
d. Turn the engine switch to the OFF position, and tighten the drain screw securely.
e. Reinstall the spark plug cap on the spark plug securely.
3. Change the engine oil .
4. Remove the spark plug and pour about a tablespoon of clean engine oil into the
cylinder. Crank the engine several revolutions to distribute the oil, then reinstall the
spark plug.
5. Slowly pull the starter grip until resistance is felt. At this point, the piston is coming up
on its compression stroke and both the intake and exhaust valves are closed. Storing
the engine in this position will help to protect it from internal corrosion.
Starter grip
-
-
A type (120V) Aus type
H type A type (240V)
AC RECEPTACLE
AC RECEPTACLE
AC RECEPTACLE
AC RECEPTACLE
Summary of Contents for IG2000P
Page 2: ......
