- -
-
-
3.1. LCD instruction:
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
Single voltage panel
Output indicator lamp (Green)
Overload alarm lamp (Red)
Low oil level alarm lamp (Red)
Over speed alarm lamp (Red)
1. Socket
2. Breaker
3. LCD monitor
4. Lamp
5. Energy saving switch
6. Electric lock (start switch)
7. Earthing end
8. Socket
9.
10.
Reset switch
ATS option switch
3.1.1 Instructions of dual voltage connector
Function
Function
Function
Item
Item
Item
A phase AC voltage input
B phase AC voltage input
A phase AC voltage input
B phase AC voltage input
A phase current transformer input
A phase current transformer input
5 6 out external switch,
Series connection when closed
Parallel connection when open
External battery GND
External battery 12V
B phase current transformer input
B phase current transformer input
3.1.2 Instructions of single voltage connector
Function
Function
Function
Item
Item
Item
AC voltage input
AC voltage input
Current transformer input
Relay control signal output (+12v)
Current transformer input
Relay control signal output (GND)
External battery GND
External battery 12V
10. TROUBLE SHOOTING
Key
Screen
When the engine will not start:
Is there fuel in the tank?
Is there enough oil in the engine?
Is the battery voltage 12 to 15V?
Take the generator to an authorized dealer.
Yes
Yes
Yes
No
No
No
Refill the fuel tank.
Add the recommended oil.
Replace or charge the battery
The engine fails to run with load:
Is the output indicator lamp on
Is the AC breaker switched on?
Is the overload indicator lamp on?
Is the electric appliance in good condition?
Take the generator to an authorized dealer.
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Lower down the load or replace the generator for a larger one
Replace or charge the electric appliance
Turn on the breaker.
Take the generator to an authorized dealer
