Chapter 3 Error Correction
3-12
3. 2 Other Operator Call Error
3. 2. 1 Roll Replacement
When the printer is running out of an loaded roll media, the UI Screen will display “Roll
Replacement” sign.
If there is no suitable roll media required for the current print job, the UI Screen will display “Roll
Replacement” sign as well. Please load the required roll media to any Roll Deck.
For the roll replacement procedure, see [2.3 Replacing Roll Media].
3. 2. 2 Toner Empty
When the printer is running out of toner, the UI Screen will display “Toner Empty” sign.
For the toner supply procedure, see [2.4 Replacing Toner Cartridge].
3. 2. 3 Cutter Set NG
This message is indicated when the Cutter Knob is not located at the correct position.
Open the Roll Deck, and slide the Cutter Knob fully to the left or right to align the Cutter Knob with
the end of the railing.
3. 2. 4 Scanner Unit Open
The UI screen shows “Scanner Unit Open” if the Scanner Unit is open. (not closed properly)
For closing the Scanner Unit, see [3.1.6 Original Jam].
3. 2. 5 Printer Not Available
If the Exit Cover or the Engine Unit is open (not closed properly), the UI screen shows “Printer Not
Available”.
Please check that either Exit Cover or Engine Unit is firmly closed. If it seems no problem, turn off
and again on the machine’s power switch.
Cutter Knob
Cutter Knob
