Kioti PX1002, Owner'S Manual

Page: 208 / 223

8
storage anD DisPosal
8
-
13. set all control systems neutral.
14. Plug any open exhaust pipes.
15. attach a tag onto the tractor to
inform the storage condition of
the tractor.
16. interlock the brake pedals and
apply the parking brake.
1. Check the tire air pressure and
inflate the tires if they are low.
2. install a fully charged battery.
3. Check the fan belt tension.
4. Check all fluid levels. (Engine oil,
transmission/hydraulic oil, engine
coolant and any attached imple-
ments)
5. remove grease from the ex-
posed cylinder rod.
6. apply grease to the lubrication
points.
7. remove the cover from the ex-
haust pipe.
8. get onto the tractor and start the
engine.
9. Check if the instrument panel
and all parts operate correctly
while running the engine for a
few minutes.
10. Drive the tractor outside and
check if it is operating properly.
Park the tractor outside and idle
engine for at least 5 minutes.
UsINg tractor after stor-
age
to avoid injury :
Never clean the tractor body
while the engine is running.
Never run the engine in an
enclosed area without proper
ventilation system in order to
prevent poisoning by exhaust
gas.
When storing the tractor, re-
move the key from the switch
and store it separately in order
to prevent an unauthorized
person from operating the
tractor and being injured.
cover the tractor after the
muffler and the engine have
cooled down.
If the battery is not to be re-
moved, disconnect its nega-
tive terminal at least. the wir-
ing can be gnawed by rodents,
leading to a fire.
•
•
•
•
•
caUtIoN
TG110-AU-08.indd 3 2013-01-22 오전 10:31:29