Kioti PX1002 Owner'S Manual Download Page 125

Page: 125 / 223

pX7520 / pX9020 / pX1002

JUmP sTARTING

(1) dead battery

(2) Jumper cables

(3) Helper battery

If the battery is discharged and the

engine cannot be started, it is possi-

ble to start the engine by connecting

the discharged battery to a battery

from another tractor or other extra

battery.
1. check that the voltage of the dis-

charged battery is same as the

voltage of the other tractor or ve-

hicle for jump start. (Specification

for this tractor: 12v)

1. Start the engine and run it at a low

speed and without load for approx.

3 to 4 minutes.

2. In cold weather, increase the

warming up time to 10 minutes.

3. If it is very cold, warm up the en-

gine for approx. 15 minutes.

4. The engine throttle can be open

for 50 % in order to shorten the

warming up time.

5. The engine is sufficiently warmed

up when the temperature gauge on

the instrument panel indicates 1/2

of the normal temperature range,

regardless of the warming-up time.

6. do not increase the work load rap-

idly after starting work.

7. Run the engine without load for

approx. 2 to 3 minutes before stop-

ping the engine after work.

TG1O502A

Warming up the engine ex-

cessively increases fuel con-

sumption and affects the dura-

bility of the tractor negatively.

Never warm up the engine and

leave the tractor for an extend-

ed period of time. It can cause

fire and an accident.

Never leave the tractor unat-

tended while warming up.

•

WARNING

HOW TO WARm UP ENGINE

TG110-AU-05.indd 8

2013-01-22 오전 10:29:40

Summary of Contents for PX1002
































































































































































































































Search results

Summary of Contents for PX1002

Reviews:

Related manuals for PX1002

Brands by name

Popular brands

Kioti PX1002, Owner'S Manual

Search results

Summary of Contents for PX1002

Reviews:

Related manuals for PX1002

Brands by name

Popular brands