Kioti PX1002 Owner'S Manual Download Page 106

Page: 106 / 223

px7520 / px9020 / px1002

Use caution when inflating or

checking air pressure.

•

wARNING

Do not disassemble or as-

semble the tire. If it is neces-

sary to disassemble/assemble

the tire, let a qualified service

person perform the work.

•

wARNING

Do not use tires larger or

smaller than specified.

•

wARNING

though the tire pressure is factory-

set to the prescribed level, it naturally

drops slowly in the course of time.

thus, check it everyday and inflate

as necessary.

(A) Insufficient

(B) Standard

TIRES, whEElS AND bAllAST

GENERAl TIRE INFORMATION

T85O530A

T46w030A

TG110-AU-04.indd 52

2013-03-06 오후 5:18:49

Summary of Contents for PX1002
































































































































































































































Search results

Summary of Contents for PX1002

Reviews:

Related manuals for PX1002

Brands by name

Popular brands

Kioti PX1002, Owner'S Manual

Search results

Summary of Contents for PX1002

Reviews:

Related manuals for PX1002

Brands by name

Popular brands