9
9
-
TROUBLESHOOTING
causE
counTErmEasurEs
5. Hydraulic system is
faulty
Oil is leaked from pipe or hose
The pipe clamp is loose. Re-tighten it.
The pipe is cracked. Have it repaired in a workshop.
3-point hitch cannot be lowered
Set the lowering speed control knob to open if it is set to the
stop position.
The valve and cylinder are damaged.
Have them repaired in a workshop.
3-point hitch cannot be lifted
The transmission fluid is insufficient.
Add it to the specified level.
There is air in the intake pipe. Bleed the pipe.
The oil filter is clogged. Replace it.
The hydraulic filter, valve and cylinder are malfunctioning.
Have them repaired in a workshop.
3-point hitch vibrates by itself
Set the draft control lever to the “Deep” position.
Select the highest top link hole.
6. Electric system is
faulty
Headlamps cannot be turned on or
are dim.
The fuse is blown. Check the wiring and replace the fuse.
The bulb is blown. Replace it
The ground and terminal wirings are poorly contacted.
Check and clean them.
The battery electrolyte level is low. Charge the battery.
Battery cannot be charged
Check the battery and alternator.
Horn does not sound
The horn switch is faulty. Replace it.
The wiring is faulty. Repair it.
The horn is damaged. Repair or replace it.
M50-EU-09.indd 5
2009-09-15 오전 9:56:03
Summary of Contents for DS4110
