maintenance
57
7
-
2
M56O728A
M56O727A
fLUSH CooLing SySTeM AnD CHAnging CooLAnT (AD)
1. stop the engine and let it cool.
2. to drain coolant, remove the drain
plug from the radiator and turn
the radiator cap to the 1
st
notch to
release pressure in the radiator.
then, remove the cap completely.
3. after all coolant is drained, close
the drain cock.
4. fill with clean water and anti-
freeze.
5. install the radiator cap securely.
(1) Drain cock
(1) reservoir tank (2) radiator cap
(a) full
(B) low
6. add coolant to the reservoir tank
to the "full" level.
7. start and operate the engine for
few minutes.
8. stop engine and let cool.
9. check coolant level of reservoir
tank and radiator. add coolant if
necessary.
Coolant capacity
7.8 l (2.06 u.s.gal)
To avoid accidents:
Do not remove the radiator
cap while the coolant is hot.
you can be burned by hot
steam. Make sure to remove
it after the coolant is cooled
down enough.
Even though the coolant is
cooled down, turn the cap to
its first stop and then wait un
-
til it is depressurized before
removing the cap completely.
•
•
CAUTION
M56(TB110)(CK2810)-호주판-OM-07.ind29 29
2012-10-16 오후 2:47:33
Summary of Contents for CK2810
