.
a. Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and give the device time to cool down
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tools operation. If
damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f. Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking
into account the working conditions and the work to be performed. Use of the power
tool for operations different from intended could result in a hazard- ous situation.
5. Service
a. Please use a qualified expert who uses original replacement parts to repair your
power tool. This will ensure proper functioning of the power tool.
ADDITIONAL SAFETY INSTRUCTIONS
When using electric tools, basic safety precautions should always be followed
to reduce the risk of fire, electric shock and personal injury.
Read all these instructions before attempting to operate this product and save
these instructions.
Before using the appliance
Check the following:
- Make sure the voltage of the hot air gun corresponds with the power voltage;
- Are the mains lead and the mains plug in a good state: strong, without ravels or
damages.
Caution is advised when using long extension cables
Do not use the appliance under moist circumstances;
The metal mouthpiece gets hot. Watch out and do not touch the metal mouthpiece;
Prevent damage of the heating element. Do not lock or block the mouth piece or the
ventilation openings;
Do not leave the appliance when switched on;
When in operation do not point the device at people or animals
Never look into the hot air nozzle
