Kintech Engineering Geovane, User Manual, Page: 46 / 49

47
If you don’t know what ID the Geovane has previously been given, activate the
slide button “Scan Geovane ID” and the Tool will try all the possible Geovane ID
(00 to 99). As soon as one Geovane is detected, the window will be updated with
the current configuration of said Geovane.
Step 2: select the new configuration and upload it.
Set up the desired configuration and upload it to the Geovane by pushing the
“Upload configuration” button. The configuration will then be uploaded to the
Geovane and it will be stored in its non-volatile internal memory (EEPROM).
A message in the prompt window at the right will confirm whether the
configuration has been successfully uploaded to the Geovane.
Notice that the Geovane Configuring Tool will always require getting the current
configuration of the Geovane before uploading a new configuration.