Kintech Engineering Geovane, User Manual, Page: 31 / 49

32
Whenever a message is sent to the Geovane, the identifier field of the message
must correspond to the Geovane Listener identifier address, otherwise the
Geovane will ignore the message. In applications where more than one Geovane
is connected to the RS-485 bus, you should assign each Geovane in the system a
unique Listener ID. The master will then be able to address individually each
Geovane.
Unless otherwise specified at the time of ordering, the factory default value for
the Listener ID is 00 and for the Talker ID is GV (Geovane).