www.augertorque.com
19
19
MOUNTING - Skidsteer and Miniloader Offset Mount
SAFETY FIRST
ALWAYS
work in pairs (2 skilled operatives) whenever the components are being
assembled or disassembled from the parent machine . Always check the weight of the
attachment and ensure you have the correct equipment for handling it .
ALWAYS
check parent machine:
• Is in correct working order
• Is parked correctly on flat ground
• Has its hand brake
ON
, its hydraulic circuit locked out and its engine switched
OFF
.
Check that the mounting frame is of the correct model and type to fit the parent machine .
Ensure mounting frame and attachment points are clean before fitting .
Use suitably rated lifting equipment if required (see data plate for weight) .
Hoses should always be disconnected when fitting, removing or adjusting .
FITTING:
Ensure all components are greased on assembly:
• Fit offset mount back plate to mounting
frame, ensure spacer is fitted between back
plate and mount supports tighten to 100Nm .
• Slot the top of the parent machine frame
under the top edge of the Mounting Frame or
Locating Hooks (A) (refer to parent machine
operator’s manual) .
• Swing the parent machine frame to the
vertical position (B) .
• Following the parent machine operators
manual, ensure that the Mounting Frame is
securely locked in place (C) .
DIN 1284
100Nm/73.7ft-lb
A
B
C