Kinroad XT50GY, User Manual

Page: 15 / 28

12
V.Checking,Adjustm-
ent and Maintenance
Machine Oil Checking
★
The vehicle should be checked for
machine oil before drive by sup-porting
it with the
Main stand on a flat ground.The oil
livel should be between the upper and
lower
Lines of the oil gauge. Which is not
screwed into the filling orifice.
★
High quality 4-stroke machine
oil. Class SE or SD in API
classifi-cation.of SAE15W-40 in
viscosity will help maintain a long
service life or the engine.In case those
are not available,a substitute suitable for
the ambient temperature of application
should be selected according to the table
on the right side.
Renewal of Machine Oil
Machine oil plays a very important
role in the normal operation of the
engine and for this reason,it is necessary
to check the motorcycle for machine oil
periodically and renew the oil once
every800-1,000km of driving by the
following procedures.
Remove the screw plug from the
bottom of the hot engine to drain off all
old oil.
Wash the oil filter screen clean and
remount it really to position.Then fill in
0.8L fresh machine oil and start the
engine for idle running2-3 minutes.
Let the engine stop for 1-2
minutes and check to see whether
the oil level is in between the upper
and lower lines of the oil gauge.
Do not use any machine oil of
a different grade than the specified
one to avoid machinery failure.